The LimbArt resin has a higher viscosity that produces the smooth and glossy surface finish. The cured colour is clearer, helping to make the graphics “POP”. This laminating resin is strong and tough, formulated to displace the slow curing, expensive two part resins fabricated with graphic images on the outer surface.
Extremely easy to work with, allowing you to fabricate rigid thin wall fabrications with super smooth finished edges and high surface gloss.
Produces bubble and tack free laminates with high flexural strength, excellent cured resin clarity, that saves you time, money, increases shop productivity, and will not crush your liners from excessive pressure.
|LAR2||2kg LimbArt Laminating Resin|
NOTE: Always mix the BP paste hardener into the resin for a minimum of 2 minutes by hand, until the paste is observed to be fully and evenly dissolved into the resin, or mix for 30 seconds using a Mix Master turbine paddle mixer.
Warm the cast to 24*C / 75*F and laminate over as dry a cast as possible to achieve the best results.